In recent years, the growing popularity of heating system on the traditional ceramic tiles and wood flooring of new functional requirements. In the face of the wide variety of surface decorating material, many users often feel unable to warm. To this, experts say, in theory, ceramic tiles and wood flooring can be used as heating system supporting surface decorating material, but because of the different materials, surface decorating material selection of these disadvantages.
Ceramic tile
Advantages: high efficiency, easy care clean.
Disadvantages: not easy to maintain, heat loss.
Experts said that with regard to the analysis of heat conduction from the tile faster than wood floor heat transfer, thermal efficiency is high. Tiles do not like the wooden floor that would appear bold, bending phenomenon, to bear the high temperature situations. In addition, the tiles are easy to take care of. In addition, the ceramic tile of affordable, long service life.
Tile shortcoming is not easy to change, if the heating system in need of repair, ceramic tile opened after all scrap. In addition, if the tiles pavement were not in place, in the course of the contract will make the entire ground serious deformation resulting ground loosening, fracture. In addition, ceramic tiles as a heating system for floor decoration material, heat faster cold also fast, the heat preservation effect as wood flooring.
Compound floor
Advantages: deformation of the feet feel more comfortable.
Cons: slow heat conduction.
With the rise in temperature of the heating system, the deformation of wood flooring will be gradually reduced, this is a composite wood anyway interlaced material hold-down results. In addition, the back of laminate flooring has a dense anti-deformation grooves can decompose heating surface stress, but also conducive to the air circulation, reduce noise, longer warm.
Because of the density of composite floor, in the heating of faster water distribution, prone to the phenomenon from the seam. In addition, laminate flooring is relatively thick, heat slowly, is not conducive to heat conduction through the floor to ground. In the heat transfer process, composite floor surface temperature difference between up and down of large, easily lead to contraction deformation, the floor will cause the floor upward, torsion and bending, cracking, floor stability, smoothness could not be guaranteed.
Laminate flooring
Advantages: less expensive, good thermal properties.
Disadvantages: there are formaldehyde release, short life.
Flooring surfaces for wear-resistant layer of metal oxides, diffusion of heat in the ground very quickly and evenly. Flooring life is not very long, but it is easy to replace. In addition, the dimensions of the laminate flooring is relatively fixed, mostly to sheet on the market, the relatively good thermal stability, low moisture content, so that the floor heating is not easy.
■ Link
How to choose a warm floor
Select and heating system matching the wood floor (hereinafter collectively referred to "warm the floor"), from the dimensional stability is good or bad, the amount of formaldehyde emission, heat transfer speed three aspects of the checks.
Dimensional stability is better dimensional stability of wood floor and wood floor bonding strength of closely related: the higher the internal bonding strength, the floor's ability to withstand temperature changes, the better, and less prone to cracking phenomenon. Only base compact wood floor, can guarantee the long-term no cracking at a high temperature, no distortion. Warm floor in high humidity condition size cannot be changed so much that the expansion rate to less than or equal to 2.5%.
Formaldehyde emission do not exceed consumers choose to warm the floor, be sure to select low formaldehyde content as possible on the floor, because the higher the temperature, formaldehyde emission. In the relatively closed to warm the floor in the living room, and indoor formaldehyde release other articles may be exceeded, the risks to human health.
Heat transfer speed in General, a high thermal conductivity, thermal conductivity of the product better. Because of the warm floor to long endure high-temperature heating, floor heating floor decoration layer performance stability, high temperature for a long time under the circumstances or fading. In General, the inlet floor just reach European standards, domestically produced Enpr13329 floor just reach the national standard GB/T1802 2000, can be used as a heating system for floor decoration materials.
No comments:
Post a Comment