Cooling way warm market share increasing
"At present radiator and floor heating market share almost half, new owners select the bias to warm. "Henan Han as HVAC equipment Engineering Co., Ltd. General Manager Yang people, in fact, both advantages and disadvantages. Warm more comfortable, but warming is slow, accessories and more, the engineering capacity, high up-front investment, on the strict construction decoration; but less heat comfort, temperature rises rapidly, low cost.
Floor heating in the heating mode of different mainly divided into low-temperature hot water floor heating and heating cable floor radiant heating. Usually people feel appropriate foot temperature is 24 ° c, the temperature is 20 ° c in the head. When used in floor radiant heating, indoor surface temperature, the temperature of the bottom-up gradually decreasing, the feet cool temperature head, good sensory and human physiology demand the closest. Furthermore, heating is only the "warm" not the "wind", you can keep the air clean.
"Warm relative to the heat sink, more comfortable, but many use to warm the owners did not feel particularly comfortable, and some families even have floor heating pipe burst. "Zhengzhou Bo Rong energy-saving equipment co., Ltd. Manager Shen Guoqiang, these problems are many owners away from the warm. In fact, this is not a warm itself, but the construction and use of misconduct.
Heating of the laying of the requirements of the construction is very high. Select warm consumers must choose a specialty of the heating company and quality assured the tubing. "Radiator and floor heating for water temperature requirements are different. In the central heating, water supply temperature of 70 ° c ~ 80 ° c, using the heat sink, you can keep the room temperature reaches around 18 degrees Celsius. But the most commonly used to warm the PERT pipe is a thermoplastic material, in water supply temperature 60 degrees Celsius with a life expectancy of up to 50 years, the water temperature 90 ° c life only one year. Central heating is generally in accordance with standard heating radiators, used directly for heating will cause heating overtemperature tube leaks and damage to the floor, the room temperature is too high. In fact, for a warm, 40 ° c ~ 45 ° c can be achieved heating requirements. While many people are not aware of this. "Shen Guoqiang describes, in accordance with the professional point of view, central heating owners want to enjoy the specification qualified heating must install mixed water cooling system, and so reduce the temperature of the device, in order to achieve the warm comfort, energy-saving and safety purposes.
Heating quality heating can be comfortable and save energy?
"There are so many home heating company, what brand better?" in the face of numerous heating company, many consumers feel start.
"10 years ago, consumers may only concern the warm warm not problem, but now more and more consumers are concerned about the quality of heating. "Shen Guoqiang said," now consumers have a common misconception, often heating material quality and the ' heating ' own quality mix, heating materials is only a guarantee of reliability of heating and heating of the ' quality ' should be reflected in the user's use of the heating system of the ' experience '. ”
Judge a heating system is counted as "quality standard" for heating is not just looking at it what brand of heating equipment and accessories, and more importantly your home heating system is able to provide you with comfort, energy-saving, safe and convenient experience.
Shen Guoqiang said: "a good heating system is a control device, the water temperature control security guarantee comfort, room temperature control, time control and regional control ensure that energy efficiency and convenience. However, due to cost and concepts, many consumers have not heating concept, the quality of the market most or simple simple heating, the lack of basic control system, which is also high cost caused users to use, the discomfort and the root causes of insecurity. ”
"Natural gas is becoming more and more expensive, faster to use couldn't afford it, is there any way to reduce heating costs?" and "can control each respectively under need room temperature?," "I 7 p.m. after work, I want to open in 6 point of boiler house, to achieve?" and "the desire to achieve the above, the high cost?"
On these issues, Shen Guoqiang think not difficult, "in fact, the above issues are organized around the heating energy efficiency, comfort and convenience, the current can be resolved. Regardless of what kind of heat sources and heating have corresponding maturity control programmes and products for users to choose. ”
"Give a heating system and basic control device, in fact, the cost is not high: used to control the heating water temperature of the mixing water system price from $ 1000 to sansiqianyuan, import prices will be higher, but you can give warm provide a good protection; whereas the radiator thermostat valve, programmable time control thermostat etc used for room temperature control device, the minimum they prefer money can let user experience to heating comfort, energy-saving benefits. ”
"Heating system control unit cost can be seen as an investment, not consumption, because late to the user's use of cost savings than increased acquisition costs while obtaining better results. Compared with conventional heating systems, has good control of the heating system can reduce user at least 30 per cent of the cost of heating. ”
No comments:
Post a Comment