According to the relevant personnel, geothermal floor due to the particularities of its functionality and complexity of the geothermal system, and compared to ordinary floor, geothermal floor maintenance has its unique characteristics, heating and moisture, we should pay special attention.
Install flooring insulation to note
Use geothermal floor, consumers must be taken to gradually to the floor and floor heating.
Installation, surface temperature should be maintained at around 18 ° c. Before installation, to the cement floor gradually warming, increased 5 ° c per day, up to 18 ° c or standard. After the installation is completed within 3 days of the head, to continue to maintain this temperature, 3 days before they can heat up, and every day could only warming 5 ℃.
Note the heating to progressive
The first use of geothermal heating, attention should slow the warming. First use, heating three days before the start of the progressive warming: first day of the water temperature is 18 ° c, the second day, 25 °, 30 ° c on the third day, the first four days to reach the normal temperature, water temperature 45 ° c, the surface temperature 28 ℃ ~ 30 ℃. Do not heat up too fast, too fast, the floor may expand the distortions of cracking occurred.
Enable it again after a long time, but also a gradual warming
Long time again enable geothermal heating system, like the first time use, strictly programmed by heating.
Surface temperature must not be too high
Notably, the use of geothermal heating, surface temperature should not exceed 28 ° c, water temperature should not exceed 45 ° c, if the temperature exceeds this, affect the life of the floor and the usage period. General family, the winter temperature reaches 22 ℃ or so, it has very comfortable, normal temperature, it will not affect the use of geothermal floor.
Close the geothermal system, note the temperature to progressive
As the season goes on, when the weather is warm up to geothermal system for indoor heating is no longer needed, it should be noted that close the geothermal system is a process, the floor of the cooling process is gradual, sags, if cooling too fast, it also affects the life of the floor.
The room is too dry, you can consider humidifying
Dry winter climate, coupled with the use of geothermal heating, floor long at high temperature, easily dry out when owners need to room humidification, in order to avoid deformation, moisturizing dry floor cannot be ignored.
No comments:
Post a Comment