Strong cold wave strikes geothermal floor four performance decision quality

Performance analysis

1, heat conduction cooling performance tuning

Wood and bamboo is a very good natural materials, ground heat transfer through the floor to the surface, will have the heat loss, ideal for floor cannot put these losses to a minimum. So in order to reduce heat loss and lower the heating operation and maintenance expenses, ground heating floor must uncheck the "selected" thick and thin. You can select multiple hardwood, bamboo floors and flooring, thickness not exceeding 8 mm, the maximum may not exceed 10 mm.

Click on the picture to enter the next >>

Strong cold wave strikes geothermal floor four performance decision quality

2. material stability better than

The use of geothermal floor complex environment, particularly in northern regions, non-heating season the ground are subjected to all kinds of moisture and temperature of heating surface and sharp rise, the floor must bear the "temperature" and "humidity" double change. Therefore, you must purchase the geothermal floor material stability, such as flooring, hardwood flooring, Bamboo flooring these integrated composite floor.

3 the sum of the heat, humidity

Integration with composite flooring adhesives, adhesive, subject to the environmental protection, the bonding strength, resistance to high temperature and high humidity aging these three indicators. Especially for geothermal floor, to be resistant to high humidity, low temperature resistance, experimental, if you use normal adhesives, environmental indicators of moisture resistance, anti-aging, expansion, and so on, are not fulfilled. So the consumers to buy, see the merchant's product reports, inspection report is very necessary.

4. wear resistance to durable

Because it would not be appropriate for geothermal floor, thick and thin composite surface layer to 0.3-0.6 mm as well. The main surface of the paint wear value than traditional indicators.

Expert perspectives

Geothermal floor is more thick, warm

Industry insiders told reporters that the comparison for geothermal heating way floor is wood flooring and solid wood parquet both types.

Geothermal floor must have good thermal conductivity, thermal stability, environmental performance, resistance to deformation performance of "four virtues" requirement. Ground heat transfer through the floor to the surface, will have the heat loss, ideal for floor cannot put these losses to a minimum. So in order to reduce heat loss and lower the heating operation and maintenance expenses, ground heating floor must uncheck the "selected" thick and thin.

Reporters interview, found that while businesses are all that can be used to heat. But according to experts, including 55% cannot be used for heating systems, 25% can be used for heating, but the results are not satisfactory, and only 20% are private geothermal floor. Therefore, experts warned consumers for some misleading statement, note that if the wooden floor "more thick legs feeling better," "thicker more insulation", dedicated to the back of the geothermal floor has a foam pad, aluminum foil, the box with the "special" greenhouses is geothermal floor, etc. Everyone knows these claims for no reason, they only affect the ground heat dissipation.

Selection of the mat to reject a foam material

As for water circulation heating of geothermal heating way, in a real application and installation process, the most critical aspects in addition to the floor of the selection, installation, the ground handling is good or bad will also be on the geothermal heating system can properly use later played a decisive role.

Before installing the floor on ground handling, should be strictly in accordance with national standards on ground control before you can install the floor for geothermal installations, but also to the strict implementation of standards, to ensure that the geothermal heating system in the future use of normal operation.

Experts say that in the geothermal heating system, the correct way is installed in the floor and ground-to add a layer of mats, floor mats, preferably imported professional paper mat, because the import of professional paper mat with thermal soon, no distortion, and other characteristics. Consumers in the choice of mats, whether domestically produced or imported, will not be able to use foam material, because of the foam material mats in the geothermal heating system, heating, would produce the harmful gas to consumers in an adverse health effect.

Taking into account any floor has a defect in case of thermal deformation, the second year in consumer use of geothermal heating system, always in strict accordance with the provisions of the heating process cycle progressive, never a step up in place, such as the first day only warming up to 18 ° c, the second day, 25 ° c, the third day 36 degrees Celsius. Laminate flooring is suitable for water temperature up to 45 degrees c, the floor surface temperature does not exceed 30 degrees Celsius. If you exceed this temperature, it will affect the life of the floor and the usage period. General family winter indoor temperature reaches around 22 ° c is very comfortable.